Heat-seal fixing tape for blocking dies
thermal bonding film, transparent
€59.49 *
€0.00*
(% saved)
Net price
/ 1 roll
€70.79*
Gross price / 1 roll
incl. 19% VAT
ⓘ
In stock, deliverable at short notice
Quantity
Unit price
From
1
roll
€59.49*
From
5
rolls
€56.36*
From
25
rolls
€53.23*
From
50
rolls
€50.10*
Total:
*
Gross total incl.
19% VAT:
19% VAT:
Item number:
3325-025
Product information "Heat-seal fixing tape for blocking dies"
to mount hot-stamping dies
- Width (in mm) : 25,4
- Roll length (in m) : 50
New version: transparent
Properties of "Heat-seal fixing tape for blocking dies"
Dimensions | |
Format: | on rolls |
---|---|
Roll length (in m): | 50 |
Thickness in mm: | 0,05 |
Width (in mm): | 25,4 |
Colour | |
Colour: | brownish-transparent |
Adhesive properties | |
Adhesive: | Nitrile Phenolic |
Material | |
Material: | thermo-activated adhesive film |
Other properties | |
Category: | Adhesive tape, Typeholders |
Minimum order quantity: | as of 1 roll |
https://service.schmedt.de/ww2000/pdf/e-td_klischeeklebeband_transparent.pdf
Login
Below you can see questions that other customers have asked about this product. Do you have a question of your own? Then feel free to ask us using the button below. You decide whether your question may be published.
Is this adhesive reversible? How does one remove one die then attach a different die to the Pragnant die/block holder?
Yes, it is reversible. I would recommend to heat the blockholder up again and then take a spatula to go underneath the die to loosen it off again. But it is not easily reversible if you put a lot (e.g. cover the whole die with tape). If you only put small strips (e.g. 5mm width on the top and bottom of the die), it is enough to hold the die in place and allows it to be removed more easily as well.