Maroquin - leather balm
for cleaning and softening
Contents: Bottle / 250 ml€10.50*
In stock, deliverable at short notice
19% VAT:
Maroquin leather balm cleans the pores, lets the leather breathe again, and restores suppleness and a pleasant grip. Gilding is not attacked; on the contrary, it is enhanced and stands out even better.
The balm is used for cleaning and softening aged and brittle leathers and is also conditionally suitable for parchment (individual tests are required).
It is recommended to lightly grease the leather with vaseline after cleaning.
Correct application (be patient and prefer to start with less foam; the process can be repeated if you notice that the cleaning was not 100% successful):
- Lightly lather up the leather balm with a clean sponge (beat like soap to create foam).
- Pick up only the foam with a clean (or well wrung out) sponge.
- Apply firmly with circular movements.
- Clean the sponge and apply new foam.
- Repeat until you feel that the leather is sufficiently clean.
- Allow to dry thoroughly (a few hours should be sufficient). The leather must be really dry afterwards, and you will feel it.
- Repeat the cleaning process if necessary, if the sticky effect persists.
- Grease lightly with Maroquin leather vaseline.
| Colour | |
| Colour: | yellow to brown |
|---|---|
| Material | |
| pH value: | 6,85 |
| Other properties | |
| Category: | Leather preservatives, Maroquin Leather Care, Preservation and prevention, Restoration |
| Minimum order quantity: | as of 1 bottle |
Login
Below you can see questions that other customers have asked about this product. Do you have a question of your own? Then feel free to ask us using the button below. You decide whether your question may be published.
Sind Maroquin Lederbalsam und Ledervaseline separat einzusetzen oder sind sie miteinander kompatibel? Wann ist welches Produkt zu verwenden?
I think I made a mistake in applying the leather balm. I probably used too much of the emulsion, because the surface of the leather is now sticky. Is it safe to apply again?
How do I correctly apply Maroquin leather balm?
1. Lightly lather up the leather balm with a clean sponge (beat like soap to create foam)
2. Pick up only the foam with a clean (or well wrung out) sponge
3. Apply firmly with circular movements
4. Clean the sponge and apply new foam
5. Repeat until you feel that the leather is sufficiently clean
6. Allow to dry thoroughly (a few hours should be sufficient) - the leather must be really dry afterwards, and you will feel it
7. Repeat the cleaning process if necessary, if the sticky effect persists
8. Grease lightly with Maroquin leather vaseline