Case extension for PräLeg
to case-in small cases and flex covers
Ready for despatch in approx. on request
Item number:
90705010
Product information "Case extension for PräLeg"
Consists of two separate pieces: left and right
This case support enables working with very small hardcover formats and flexible covers. It is possible to process the covers flat (flex covers) or upright (small cases). Very small hardcover formats such as < DIN A6 and flex covers (that would not hold in the normal system) can be processed. When using the cover system, the book block thickness must not exceed 60 mm (as otherwise the book block would be blocked from going up).
Min. open format of the case: approx. 10cm x 10cm
Max. open format of the case: approx. 30cm x 20cm (for flex covers that are processed flat, the lateral stops can be removed to also allow for bigger formats)
This case support enables working with very small hardcover formats and flexible covers. It is possible to process the covers flat (flex covers) or upright (small cases). Very small hardcover formats such as < DIN A6 and flex covers (that would not hold in the normal system) can be processed. When using the cover system, the book block thickness must not exceed 60 mm (as otherwise the book block would be blocked from going up).
Min. open format of the case: approx. 10cm x 10cm
Max. open format of the case: approx. 30cm x 20cm (for flex covers that are processed flat, the lateral stops can be removed to also allow for bigger formats)
- Block width (mm) : as of 60
Properties of "Case extension for PräLeg"
| Dimensions | |
| Block width (mm): | as of 60 |
|---|---|
| Format range | |
| Block width (mm): | as of 60 |
| Other properties | |
| Category: | Accessories / Parts |
Login
Below you can see questions that other customers have asked about this product. Do you have a question of your own? Then feel free to ask us using the button below. You decide whether your question may be published.