Embossing, gilding, finishing tools
Tools and equipment for the finishing of books, e.g. block pressing or for gilding the book edge, enable an extraordinary and superior decoration of books. We offer manual tools and small devices for this purpose, which help to make the work processes accurate and reproducible - for a consistently high quality.

All products

Filter products by:
Filter
Category
Sort products by:
69Products
Heat-seal fixing tape for blocking dies
thermal bonding film, brown

In stock, deliverable at short notice

from €50.10* to €59.49*
Double-screw edge gilding press
made of waxed beechwood
Width (in mm) [2] : 450 (between the screws), 350 (between the screws)
Variants from €233.00*
Pair of binding bars for edge-gilding press
Width: 35 cm / (2 pcs = 1 pair)

In stock, deliverable at short notice

€56.00*
Pressing board for edge-gilding
made of beechwood, conical
Dimensions [2] : 155 x 150 mm, 240 x 150 mm
Variants from €58.00*
Gilding cushion covered with suede
and wind protection

In stock, deliverable at short notice

€82.00*
Agate burnisher
to burnish a gilding with gold leaf
Version [2] : curved, T-shaped
Width (in mm) [3] : 20, 25, 40
Variants from €52.00*
Edge gilding roll, electrically heated
Width: 50 mm
Power supply [2] : 230 V / 50 - 60 Hz (AC), 110 V / 50 - 60 Hz (A.C.)
Variants from €299.00*
Spare silicone roller for edge-gilding roll
Width: 50 mm

In stock, deliverable at short notice

€75.00*
Quick-acting clamp for edge gilding
Daylight: 320 mm

In stock, deliverable at short notice

€74.00*
Gilding tool "Ascona"
handle with brass point

In stock, deliverable at short notice

€85.00*
Gilder's tip (gold lifter)
for leaf-gilding
Size [3] : 2.5", 3.5", 4"
Width (in mm) [3] : 63, 89, 100
Variants from €10.23*
Gilding knife with steel blade
Total length: 26 cm

In stock, deliverable at short notice

from €45.81* to €53.45*
Haas typestyle Diethelm Antiqua
made of zinc-aluminium
Type size (in points) [9] : 8/10, 10, 12, 14, 16, 20, 24, 28, 36
Version [3] : Complete set of 280 characters, Set of 150 characters, Initials set of 59 characters
Variants from €177.00*
Haas typestyle Bodoni Antiqua
made of zinc-aluminium
Type size (in points) [9] : 8/10, 10, 12, 14, 16, 20, 24, 28, 36
Version [3] : Complete set of 280 characters, Set of 150 characters, Initials set of 59 characters
Variants from €203.00*
Haas typestyle Helvetica Mager
made of zinc-aluminium
Type size (in points) [9] : 8/10, 10, 12, 14, 16, 20, 24, 28, 36
Version [3] : Complete set of 280 characters, Set of 150 characters, Initials set of 59 characters
Variants from €177.00*
Haas typestyle Normal Grotesk
made of zinc-aluminium
Type size (in points) [9] : 8/10, 10, 12, 14, 16, 20, 24, 28, 36
Version [3] : Complete set of 280 characters, Set of 150 characters, Initials set of 59 characters
Variants from €177.00*
Haas typestyle Commercial Grotesk
made of zinc-aluminium
Type size (in points) [9] : 8/10, 10, 12, 14, 16, 20, 24, 28, 36
Version [2] : Complete set of 280 characters, Set of 150 characters
Variants from €221.00*
Haas typestyle Steinschrift
made of zinc-aluminium
Type size (in points) [6] : 8/10, 10, 12, 20, 28, 36
Version [3] : Complete set of 280 characters, Set of 150 characters, Initials set of 59 characters
Variants from €221.00*
Haas typestyle Schmale Magere Grotesk
made of zinc-aluminium
Type size (in points) [7] : 6, 8/10, 10, 12, 14, 16, 20
Version [2] : Complete set of 280 characters, Set of 150 characters
Variants from €188.00*
Haas typestyle Diskus Mager
made of zinc-aluminium
Type size (in points) [3] : 12, 16, 24
Version [2] : Complete set of 280 characters, Set of 150 characters
Variants from €233.00*
Haas typestyle Schmale Haas Gotisch
made of zinc-aluminium
Type size (in points) [3] : 14, 20, 28
Version [2] : Complete set of 280 characters, Set of 150 characters
Variants from €244.00*
Haas typestyle Bodoni Kursiv
made of zinc-aluminium
Type size (in points) [4] : 8/10, 10, 12, 16
Version [2] : Complete set of 280 characters, Set of 150 characters
Variants from €221.00*
Haas typestyle Enge Latein
made of zinc-aluminium
Type size (in points) [6] : 10, 12, 16, 20, 28, 36
Version [3] : Complete set of 280 characters, Set of 150 characters, Initials set of 59 characters
Variants from €221.00*
Haas typestyle Newberry Detterer
made of zinc-aluminium
Type size (in points) [6] : 8/10, 10, 12, 14, 20, 24
Version [1] : Set of 150 characters
Variants from €221.00*
Set of spacers, made of zinc-aluminium
for Haas typestyle
Type size (in points) [10] : 6, 8/10, 10, 12, 14, 16, 20, 24, 28, 36
Variants from €20.00*
Wooden letter case for type font
with divisioning inserts

Available, delivery time 5-7 days

€66.00*
Protective oil, acid-free
for hot-stamping type - Bottle / 30 ml

In stock, deliverable at short notice

€12.17*
Brass typestyle, engraved
engraved
Type size (in points) [14] : 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 36
Version [2] : Complete set of 280 characters, Set of 150 characters
Variants from €517.00*
Set of spacers (blanks)
for brass typestyles
Variants from €41.00*
Wooden type cabinet
for stamping characters
Version [2] : with 6 drawers, with 10 drawers
Variants from €444.00*
Hand typeholder, unheated
non-centering
Width (in mm) [3] : 50, 75, 100
Variants from €129.00*
Hand tool made of brass
with wooden handle for manual gold finishing
Price bracket [7] : A, B, C, D, E, F, G
Variants from €72.00*
Blocking die made of brass
to be used in typeholders
Price bracket [7] : A, B, C, D, E, F, G
Variants from €72.00*
Curved decorative pallet made of brass
with wooden handle - Length: 7.5 cm
Price bracket [11] : P, Q, R, S, T, U, V, W, X, Y, Z
Variants from €56.00*
Decorative strip made of brass
to be used in typeholder - Length: 9 cm
Price bracket [11] : P, Q, R, S, T, U, V, W, X, Y, Z
Variants from €56.00*
Decorative brass roll
complete with wooden handle
Price bracket [11] : P, Q, R, S, T, U, V, W, X, Y, Z
Variants from €147.00*
Set of decorative line pallets - brass
with wooden handle for manual gold finishing
Version [3] : single line, two equally thick lines, one thick, one thin line
Line thickness [2] : 0.508 mm, 0.381 + 1.016 mm
Variants from €343.00*
Set of decorative line strips - brass
strips for use in typeholders
Version [3] : single line, two equally thick lines, one thick, one thin line
Line thickness [2] : 0.508 mm, 0.381 + 1.016 mm
Variants from €343.00*
Set of gouges - brass
with wooden handle for manual gold finishing

Available, delivery time 3-4 weeks

€512.00*
Set of circle gouges - brass
with wooden handle for manual gold finishing

Available, delivery time 3-4 weeks

€249.00*
Set of semi-circle gouges - brass
with handle for manual gold finishing

Available, delivery time 3-4 weeks

€330.00*
Set of professional gouges - brass
with handle for manual gold finishing

Available, delivery time 3-4 weeks

€888.00*
Set of gouges - brass
strips to be used in typeholders

Available, delivery time on request

€512.00*
Set of circle gouges - brass
strips to be used in typeholders

Available, delivery time on request

€249.00*
Set of semi-circle gouges - brass
strips to be used in typeholders

Available, delivery time on request

€330.00*
Set of professional gouges - brass
strips to be used in typeholders

Available, delivery time on request

€888.00*
Set of "Amateur" hand tools - brass
with handle for manual gold finishing
Version [2] : No. 1 - 12 (junior), No. 1 - 18 (senior)
Variants from €324.00*
Single hand tool out of "Amateur" set
brass, with handle for manual gold finishing

Available, delivery time 3-4 weeks

€38.00*