PräVis | Automatic water feed
to regulate the viscosity of adhesives
€1,300.00*
In stock, deliverable at short notice
19% VAT:
Glues in open glue trays lose moisture and viscosity due to movement, heat and dry air. To maintain the viscosity of the glue, a continuous and metered water supply is required. With the PräVis water may be supplied by two pumps, each to be controlled individually. In addition, the total amount of water to be fed can be regulated independently of the chosen ratio of the pumps. The settings are retained even after switching off the device. Set profiles may be saved and can be reloaded at any time. All settings are made on a back-lighted display. The display also indicates the level of the water reservoir or water leaks. Suction and venting of the hoses may also be controlled by the display.
Process
- First the unit is filled with water.
- Then the pumps are adjusted.
- On the PräVis, each pump is adjustable in 10 stages.
- Here, the switching frequency of the individual pumps is set.
- The higher the level set, the shorter the pause between the pump cycles.
- At level 10, the pumps are permanently active.
- The set value can be saved on the display so that this setting is active as the basic setting the next time the unit is started.
| Dimensions | |
| Depth (mm): | 210 |
|---|---|
| Height (in mm): | 520 |
| Weight: | 8,5 kgs |
| Width (in mm): | 215 |
| Technical details | |
| Capacity: | 6 litres |
| Connectors | |
| Power supply: | 12 V (with adapter for 110 - 230 V) |
| Other properties | |
| Category: | Case Making |
Login
Below you can see questions that other customers have asked about this product. Do you have a question of your own? Then feel free to ask us using the button below. You decide whether your question may be published.
Advantages
The PräVis has an automatic water feed with an adjustable inlet point. Water is pumped in regularly via a self-priming system through hose lines and automatically fed to the open glue. This enables a constant viscosity without having to add water manually.
Various settings can be determined via the user-friendly display. Once suitable settings have been determined, they can be conveniently stored.
.jpg "Animated markings image")
The water is automatically sucked in and transferred via the hose lines.
Settings for the next production can be saved via the display.
Additionally, profiles can be created and saved.
All important settings can be defined on the display.
The automatic water feed stabilises the viscosity of hot and cold glues.
The water is automatically sucked in and transferred via the hose lines.
Settings for the next production can be saved via the display.
Additionally, profiles can be created and saved.
All important settings can be defined on the display.
The automatic water feed stabilises the viscosity of hot and cold glues.
Combined in our entry-level solution
We offer the PräVis both individually and in combination with our gluing machine PräziCoat (combined with PräDeck and PräKant in the PräDeka system) and as part of our entry-level solution for the production of hardcover books (PräDeka system, PräForm XS, PräLeg XS). Discover all the machines from our entry-level solution here:
